- Technical Information
- Technical Data
- Company Info
- Site Map
A permanent part of the bead plate assembly used to attach the airspring to the suspension.
Combination mounting stud and air fitting.
A permanent part of the bead plate assembly providing an alternate mounting system to the stud.
A tapped hole usually 1/4" N.P.T. providing air entrance for the part.
Permanently crimped onto the bellows at the factory allowing complete part leak testing prior to shipment.
The heart of an Airide spring. Includes at least four plies, or layers, of material–an inner layer, two plies of cord-reinforced fabric, and an outer layer.
A solid molded rubber fail-safe device used on many suspension applications. Prevents excessive damage to vehicle and suspension in the case of sudden air pressure loss.
The lower section of the 1T and 1X style of airspring made from aluminum, steel or fiber reinforced plastic. Provides lower mounting arrangement for the airspring in the form of tapped holes or studs.
Attaches the piston to the bellows assembly. Extended, in some cases, to serve as a means of attaching the spring to the suspension.
A ring between the convolutions of the convoluted-type air spring.
On Firestone Airide springs of the 1T style, the rubber bellows bead plate portion of the spring is a separate hermetically sealed unit, available for replacement use without the piston. Called a “service assembly,” it includes a bead plate, bellows, internal bumper (if any), and all attaching hardware.